What Triac is it? PCB Ariston aqsl109 3 phase
Hi
I must change the triac. It's not mac or 0607. I suppose it's some kind of ACS. Could somebody help me to identify the triac (on the left of second photo)
I must change the triac. It's not mac or 0607. I suppose it's some kind of ACS. Could somebody help me to identify the triac (on the left of second photo)
Решение
Thanks for help.
Thanks for help.
Задан 12 июля 2021
Для ответа на вопрос нужно Войдите
QC-12B
87 шт.
от 280 ₽
TM3785
73 шт.
от 226 ₽
CR-206
99 шт.
от 625 ₽
6615JB2002A
282 шт.
от 128 ₽
Ответы 2
it says MAC 97A8 on it ACS102-ACS108, This is a triac for a voltage of 500-800 Volts, with a switching current of 0.2-0.8 amperes, and a control current of no more than 5 milliamps.
In AC voltage circuits ACS102-ACS108, it changes to any suitable-sized triac with the required parameters.
You can install any of the necessary parameters from the BTA 204, Z0109, MAC97, MAC97A8.412 series.
The gate current should preferably be within 10mA.
The correspondence of the conclusions is as follows.
A1 - COM;
A2 - OUT;
G - G.
13 июля 2021
it says MAC 97A8 on it ACS102-ACS108, This is a triac for a voltage of 500-800 Volts, with a switching current of 0.2-0.8 amperes, and a control current of no more than 5 milliamps.
In AC voltage circuits ACS102-ACS108, it changes to any suitable-sized triac with the required parameters.
You can install any of the necessary parameters from the BTA 204, Z0109, MAC97, MAC97A8.412 series.
The gate current should preferably be within 10mA.
The correspondence of the conclusions is as follows.
A1 - COM;
A2 - OUT;
G - G.
In AC voltage circuits ACS102-ACS108, it changes to any suitable-sized triac with the required parameters.
You can install any of the necessary parameters from the BTA 204, Z0109, MAC97, MAC97A8.412 series.
The gate current should preferably be within 10mA.
The correspondence of the conclusions is as follows.
A1 - COM;
A2 - OUT;
G - G.
13 июля 2021
Рекомендации